hanseatic HEKS 12254GA2 Gebrauchsanleitung Seite 55

10. Put the upper hinge on the correct side
of the door and screw it tight.
11. Screw the metal strip back onto the re-
frigerator.
12. Check that the door seal is correctly in
place (see „Checking and cleaning the
door seals" on page EN-18).
Changing the opening direction of
the freezer door
(14)
1. Unscrew the hinge screw (16) on the bot-
tom of the freezer compartment(14). Use
the cross-headed screwdriver.
2. Open the freezer door and remove the
door and hinge.
3. Remove the hinge from the door pin. g
(17)
4. On the door latch, remove the covers
on the screws (17) and unscrew the two
screws.
5. Turn the door latch 180° and fix it to the
6. Push the two covers into the door latch
7. To install the freezer door on the other
8. Insert the door with the upper door peg
(16)
9. Place the hinge on the lower door peg
Start-up
opposite side. Use the screws (17) to do
so.
again.
side, turn it around by 180°.
into the opening at the top of the freezer
compartment.
(16)
and screw it securely to the appliance us-
ing the hinge screw (16).
Page EN-23