Advanced Bionics Naida CL AQUACASE CI-7431 Handbuch Seite 13

Replacing the O-Ring on the AquaCase
The AquaCase O-Ring should be inspected prior to
each use and will need to be changed periodically.
If damage to the O-Ring is observed or suspected,
replace prior to resuming use.
To remove the existing O-Ring, use your fingers to lift a
portion of the old O-Ring out of the AquaCase.
Once a portion of the O-Ring is lifted out, hold
the O-Ring and pull the remaining portion out of
The AquaCase and O-Ring should be rinsed follow-
ing submersion in salt or chlorine treated water.
12
the AquaCase mounting groove.
1
2