Connection - Calira Sealine LG 616-DS/IU Betriebsanleitung

Downloaded from www.Manualslib.com manuals search engine
( &
"#" $ %&'

Connection

/ *
1 . *
Positive charging cable red
Negative charging cable blue
Measuring cable B+ red
Connect the charger to the supply battery (battery II) in accordance with the
connection diagram (Fig. 6). Pay attention to the cable cross-sections and en-
sure correct polarity.
Connect the negative charging cable for the battery II (blue 6 mm²) to negative
output of the device and the negative pole of the battery II.
Connect the positive charging cable for the battery II (red 6 mm²) to the posi-
tive output for the battery II of the device and the positive pole of the battery
II. For cable lengths of over 1 m, this cable must be equipped with a 30 A fuse
near the positive pole of the battery II!
Connect the measuring cable (red 0.75 mm²) to the B+ input of the device and
the positive pole of the battery. For cable lengths of over 1 m, this cable must
be equipped with a 2 A fuse near the positive pole of the battery II!
Connect the charger to the starter battery (battery I) in accordance with the
connection diagram (Fig. 6). Pay attention to the cable cross-sections and en-
sure correct polarity.
Connect the negative charging cable battery I (blue 6 mm²) to negative output
of the device and the negative pole of the battery I.
Connect the positive charging cable of the battery I (red 6 mm²) to the positive
output for the battery of the device and the positive pole of the battery I. It is
Lerchenfeldstr. 9 87600 Kaufbeuren Tel. : +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
.
.
0
Cable cross section: 6 mm²
Cable cross section: 6 mm²
Cable cross section: 0.75 mm²
31