PROGRAMMING THE OPTICAL WHEEL AND TRIGGERS
The 2 directions of the optical wheel and the 2 progressive triggers can be programmed using the
MAPPING button (7).
•
Programming a button, direction of a mini-stick or of the D-Pad:
- onto the "up" or "down" direction of the optical wheel
- onto the "right trigger" or "left trigger"
•
Steps
1
2
3
4
or press the trigger onto which you wish to place your function.
SWITCHING BUTTONS/MINI-STICKS/D-PAD
All buttons, as well as directions of the mini-sticks and of the D-Pad can be switched using the MAPPING
button (7).
•
- Switch buttons between themselves
- Switch the 2 mini-sticks
(in this case, you will to have to map the 4 directions of the first mini-stick to the 4 directions of the
second mini-stick)
- Switch the D-Pad with a mini-stick
(in this case, you will have to map the 4 D-Pad directions to the 4 directions of the mini-stick in
question).
•
- Does not work for the triggers.
- Works for the optical wheel but only on PC and in "7 axes" mode.
Steps
1
2
3
Press and release the button or direction onto which you wish to
4
Your "MANUAL PRESET" is now enabled and up to date (with the 2 functions switched).
Downloaded from
www.Manualslib.com
Examples of possible applications:
Programming procedure on optical wheel and triggers:
Enable "MANUAL PRESET" (8) by pressing the button.
Press and release the MAPPING button (7).
Press and release the button or direction to program.
Raise or lower the direction on the optical wheel
Your "MANUAL PRESET" is now enabled and up to date
(with your programming applied to the optical wheel or triggers)
Examples of possible applications:
Procedure for switching buttons, mini-sticks and D-Pad
Enable "MANUAL PRESET" (8) by pressing the button.
Press and release the MAPPING button (7).
Press and release the button or direction to switch.
place your function.
manuals search engine
Action
Action
7/12
PRESET button
color
Lit up green
Lit up red
Flashes red
Lit up green
PRESET button
color
Lit up green
Lit up red
Flashes red
Lit up green