Advanced Functions - Thrustmaster Ferrari Benutzerhandbuch

ADVANCED FUNCTIONS

ADJUSTING THE OPTICAL WHEEL'S SENSITIVITY
The optical wheel (4) has 2 sensitivity modes:
- Normal sensitivity (the default mode)
- High sensitivity (must be set)
•
Steps
1
2
(Procedure must be carried out each time the gamepad restarts or is disconnected)
•
Steps
1
2
2 PROGRAMMING MODES
The PRESET button and LED (8) allows you to view the type of programming selected:
AUTOMATIC (preprogrammed) or MANUAL (programmed by yourself). A single press of this button
allows you (even during the course of a game) to switch from one programming mode to the other.
•
This represents the default programming: the functions of the optical wheel and the triggers are
preprogrammed, as are the positions of the buttons and the directions of the mini-sticks and of the D-Pad.
PLEASE REFER TO THE "AUTOMATIC PRESET" CONFIGURATION DIAGRAMS
•
This represents your own personal programming:
- The buttons, directions of the mini-sticks and of the D-Pad can either be
- You can modify the programming to your liking and whenever you wish.
- The programming is automatically saved inside your gamepad (even when disconnected).
- When your "MANUAL PRESET" is clear, it is identical to the "AUTOMATIC PRESET".
Downloaded from www.Manualslib.com
Setting "High Sensitivity" mode:
Raise and hold the "UP" direction on the optical wheel
Press and release the MAPPING button (7)
Your optical wheel is now more sensitive
Returning to "Normal Sensitivity" mode:
Lower and hold the "DOWN" direction on the optical wheel
Press and release the MAPPING button (7)
Your optical wheel has now returned to Normal Sensitivity (the default mode)
"AUTOMATIC PRESET" (PRESET button OFF)
"MANUAL PRESET" (PRESET button GREEN)
* programmed on the optical wheel and on the triggers,
* or switched between themselves.
manuals search engine
Action
Action
6/12
HOME button
Flashes continuously
HOME button
Does not flash