Axis 216FD Installationsanleitung Seite 7

AXIS 216FD Drop Ceiling Mount Installation Guide
10. Lift and turn the inner bracket (with camera) so that the screws on the
outer bracket enter the screw slots on the inner bracket. Make sure that
the screws go all the way to the back of the slots.
Align slots
with
screws
11. Gently tighten the screws so that the ceiling tile is held between the
inner and outer brackets. Check that none of the cabling is trapped by
the brackets.
12. Referring to the AXIS 216FD Installation Guide, adjust the position of
the camera.
13. Slide the black protective shield on the inside of the dome cover so that
the camera view is not obstructed.
Downloaded from www.Manualslib.com manuals search engine
Page 7
Align slots
with screws