level one WBR-3600 Schnellinstallationsanleitung Seite 6

4. Connect the supplied ADSL cable from the WAN port
5. Connect the supplied power adapter to the WBR-
6. Ensure the WBR-3600 is powered ON, start your PC.
7. Check the LEDs.
• The PWR LED should be ON.
• For the LAN (PC) connection, one of the LAN LEDs
• The WLAN LED should be ON.
• The DSL LED should be ON if ADSL line is connected.
• The NET LED may be OFF. After configuration, it
8. Start your WEB browser. In the Address box, enter
Downloaded from www.Manualslib.com
on the WBR-3600 (the RJ11 port) to the ADSL
terminator provided by your phone company.
3600. Use only the power adapter provided. Using a
different one may cause hardware damage.
If it is already started, restart it to ensure it obtains an
IP Address from the WBR-3600's DHCP Server.
should be ON (provided the PC is also ON.)
should come ON.
the following:
manuals search engine
http://192.168.0.1