HP mp200 Benutzerhandbuch Seite 15

• For YPbPr (component) output, the supported resolution is up to 1080i so select
"1080i 50Hz" for a PAL TV set or "1080i 60Hz" for an NTSC TV set. For a TV set that
doesn't support high definition inputs, select "NTSC" or "PAL" for the SD video.
• For CVBS output, choose "NTSC" for an NTSC TV set or "PAL" for a PAL TV set.
Note: The CVBS always outputs standard definition video no matter which resolution is
chosen.
The final item is to setup the aspect ratio for your TV set. If your TV set is 4:3, then
you can choose Pan Scan 4:3 or Letter Box 4:3. If you have a wide-screen TV, then you
can choose 16:9. Use the ▲ ▼ buttons to select your aspect ratio, and press "OK" to
confirm.
If you want to change any of these settings later on, you can access them via the
"Setup" option in the main menu.
Downloaded from www.Manualslib.com manuals search engine
11