IO HAWK EXIT-CROSS Entry Betriebsanleitung Seite 40

Open
1. Make sure that the Exit-Cross is switched off.
2. Pull the folding lever (3) and fold the handlebars forward to the
normal riding position.
3. Replace the front quick release (2) and insert the locking pin (1)
into the hole provided.
Carrying strap
The carrying strap is attached to the ends of the handlebars.
While the IO HAWK Exit-Cross is folded, you can transport it comfortably
with the carrying strap.
Do not use the Exit-Cross with the safety lever open! The
mechanism is not secured in this way and in the worst case could
fold up during use!
40