First Steps And Getting Started - IO HAWK EXIT-CROSS Entry Betriebsanleitung

FIRST STEPS AND GETTING STARTED
Remove from the package, prepare for assembly
•
Take the pre-assembled Exit-Cross, the supplied tools, the screws
and the handlebar out of the packaging.
•
Pull the handlebars forward and fold out the stand.
•
Mount the indicators.
•
Check the rich pressure before the first ride, it should be 3-3.5 bar.
•
Unfold the handlebar grips: Pull the locking ring, unfold the
handlebar grips until they stop and make sure that the locking ring
engages. Move the brake lever to a position that is easily accessible
for you. Use the hexagon wrench supplied.
36