Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2 Steps for Connection:
Following are the steps to properly connect your ARM-104_v3:
1.
2.
3.
4.
5.
The Power light will lit after turning on the ARM-104_v3.
Auto and self-diagnostic process will turn the LED indicators ON
and OFF during the process.
6.
7.
Windows ME / 98
Step 1: Click Start → Settings →
Control Panel.
Downloaded from
www.Manualslib.com
Turn off your computer.
Connect the ADSL port of your ARM-104_v3 to the wall jack of the
ADSL Line with a RJ-11 cable.
Connect the Ethernet cable (RJ-45) from your ARM-104_v3 to the
Ethernet Adaptor in your computer.
Connect the Power adaptor to the ARM-104_v3 and plug the other
end into a Power outlet.
Turn on your ARM-104_v3.
Turn on your computer.
Refer to the next chapter to setup or configure your system's
Network Adaptor.
Setting Up The TCP/IP
4-port ADSL2/2+ Modem Router
ARM-104_v3
manuals search engine
Step 2: Double-click the
Network.
English
4
4
Werbung
