Werbung
Verfügbare Sprachen
Verfügbare Sprachen
!
!
To Reset the ARM-104_v3 ADSL2/2+ Modem Router:
1.2 Front Panel
The ARM-104_v3 ADSL2/2+ Modem Router's LEDs indicators display
information about the device's status.
PWR
1 LINK/ACT
2 LINK/ACT
3 LINK/ACT
4 LINK/ACT
ADSL
PPP
Downloaded from
www.Manualslib.com
All the Ethernet port of the ARM-104_v3 ADSL2/2+ Modem
Router supports auto-crossover capability.
RESET Button :
Reboot & Restore the ARM-104_v3 setting to factory
defaults.
Ensure that the device is powered on.
Press the Reset button for 10~15 seconds and release.. Do not
power off the device during the reset process.
The default settings are now restored after 30 seconds.
Lights up when the ARM-104_v3 is powered on.
Blinking when the ARM-104_v3 is Sending/Receiving data.
Blinking when the ARM-104_v3 is Sending/Receiving data.
Blinking when the ARM-104_v3 is Sending/Receiving data.
Blinking when the ARM-104_v3 is Sending/Receiving data.
Blinking when the ARM-104_v3 system is ready.
Lights up when a successful ADSL connection is
established.
Lights up when a PPP connection is established.
4-port ADSL2/2+ Modem Router
ARM-104_v3
manuals search engine
English
2
2
Werbung
