Specification; Tone Controls - Kruger & Matz KM0103 Bedienungsanleitung

SPECIFICATION

General
Power Supply Requirements:
Load Impedance
Maximum Output Power:
Chassis Dimensions:
Current Drain:

Tone Controls

Bass (at 100Hz):
Treble (at 10K):
USB/SD MUSIC Player
Signal to Noise Ratio:
Channel Separation:
Frequency Response:
FM Radio
Frequency Coverage (MHz):
IF:
Sensitivity (S/N-30dB):
Stereo Separation:
AM Radio
Frequency Coverage (KHz):
IF:
Sensitivity (S/N-20dB):
Specifications subject to change without notice.
„The Lechpol company declares that product KM0103 is consistent with the essential require-
ments and other relevant provisions of directive 1999/5/EC. The proper declaration for download
from www.lechpol.eu"
24
Downloaded from www.Manualslib.com manuals search engine
Owner's manual
DC 14,4V, Negative Ground
4 ohms
40W X 4(CH)
178x163x50mm(WxDxH)
15A
+10dB/-10dB
+10dB/-10dB
More than 60dB
More than 60dB
20Hz-20KHz
87.5 -108MHz
10.7MHz
12dBu
>30dB
522 -1620KHz
450KHz
<42dBu