Troubleshooting - Prozis Scent Bedienungsanleitung

EN
INSTRUCTIONS
PRODUCT DESCRIPTION (SEE PAGE 2)
1. Air Outlet
2. Hanging Wire
3. Led Light
4. Air Inlet
5. Silicone Seal
6. Cotton Pad
7. Tray
8. Spring
HOW TO USE (SEE PAGE 2)
1. Charge the diffuser
• Connect the USB cable to any USB power source.
• When connected, a white light will flash. The device is in standby mode.
STEP 1 | STEP 2
2. Remove the top cover
Rotate the top cover counterclockwise and then pull it out.
3. Add essential oil
Add a few drops of essential oil to the cotton pad.
4. Switch On
Place the top cover and rotate it clockwise. The LED light will stay on and
the essential oil will be released.
5. Switch Off
To stop the device from operating, rotate the top cover counterclockwise.
The LED light will switch off and the essential oil aroma will stop
spreading.

TROUBLESHOOTING

Some issues that may arise can be solved by the user. If the problem persists
after having tried the following solutions, please contact Prozis customer
service.
6