Konica Minolta 1510 Installationshilfe Seite 4

IV
New Toner Cartridge
Open the cover by taking hold of both document guides
1
and tipping the cover backward.
Take the new toner cartridge from the package.
2
3 Remove the black protective foil and other packaging mate-
rial, but do not yet remove the protective strip from the
cartridge.
Shake the new toner cartridge back and forth several times
4
in order to distribute the toner evenly, thereby improving
the print quality.
Downloaded from www.Manualslib.com manuals search engine
Only after removing the other packaging, completely
5
pull off the protection strip located on the left side of the
cartridge .
Æ
Once you have removed the protection strip, do not
shake the toner cartridge any more. Otherwise, it is
possible that toner dust will be released into the air.
Place the toner cartridge into your laser fax machine. The
6
cartridge should snap securely into position.
7 Close the cover. Make sure that the cover snaps securely
into position on both sides.
¡
The toner level memory for this starter cartridge
was set at the factory. The starter cartridge need
not be updated with a Plug'n'Print card. For each ad-
ditional toner cartridge that you insert into your fax ma-
chine, you must update the toner level memory with the
Plug'n'Print card provided.