Herunterladen Diese Seite drucken

Renkforce SH4055 Bedienungsanleitung Seite 2

Metallic

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

G Operating instructions
SH4055 Headphones, metallic
Item no. 1374925
Intended use
The stereo headset is ideally suited for multimedia applications or for music playback. Due to the
3.5 mm 4-pin jack plug, the Stereo Headset is ideal for connecting to iOS-equipment.
The product may only be used in enclosed indoor locations. Outdoor use is not allowed. Contact
with moisture, for example in bathrooms or the like, must be avoided.
Always observe the safety instructions and all other information included in these operating in-
structions. If you pass the product on to a third party, please hand over these operating instruc-
tions as well.
This product complies with the applicable National and European requirements. All names of com-
panies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Headset
• Connection cable with integrated volume control and microphone
• Operating instructions
Explanation of symbols
This symbol points to specific risks associated with handling, function or operation.
The "arrow" symbol indicates special tips and operating information.
Safety instructions
Damage due to not following these operating instructions will void the warranty! We
do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the warranty will
be null and void.
• The unauthorised conversion and/or modification of the product is not permitted for
safety and approval reasons (CE).
• The product is not a toy and should be kept out of the reach of children.
• The product must not get damp or wet. Protect the product against extreme tem-
peratures, direct sunlight, dust, dirt, strong vibrations and high mechanical stresses.
• Handle the product with care; impacts, blows, or accidental falls, even from a low
height may damage it.
• Also observe the safety and operating instructions of any other devices that are con-
nected to this product.
• Do not wear the product in surroundings that call for your complete attention (e.g.,
in street traffic or while operating machines or tools). There is a risk of accident and
injuries!
• Do not listen to excessively loud music for long periods of time. This may damage
your hearing.
• Take a break and take off the headset if you experience pressure or pain in the ear,
for example.
• Make sure that the connection cable does not get pinched, kinked or damaged by
sharp edges.
• If you see any damage, do not use the product any more, but take it to a specialised
workshop or dispose of it in an environmentally friendly manner.
• Do not leave packaging material carelessly lying around. It may become a dangerous
plaything for children.
• If in doubt about how to operate the device correctly, or should any questions arise
that are not answered in these operating instructions, please contact us or another
specialist.
Getting started/operation
In order to prevent distortions or mismatches that might damage the headset, plug the
product only into a proper headset connector.
If your audio device does not have a suitable jack to connect to the headset, please use
suitable adapters (not included).
• Switch off the audio device to which the headset is to be connected.
• Turn the volume control on the audio device all the way down.
• Connect the included connection cable to the connector (4) on the bottom side of the left ear
piece (note label "L" on the inner side of the carrying handle).
• Connect the plug (6) to the audio connector of your audio player (e.g., the port for a headset on
a tablet computer or mobile phone).
• Switch on your audio device.
• Use the "+" button or the "-" button on the control unit (5) to adjust the volume for audio play-
back (you may want to initially turn up the volume on the audio device). Audio playback can be
paused and resumed via the middle button.
On the back of the small housing is the microphone (a small hole in the housing). Do not
cover this.
Whether the buttons function with your tablet-computer or mobile phone depends on
the device.
• Three positions on the headset can be adjusted, so that the ear pieces of the headset fit properly.
1 = moving the carrying handle
2 = swivelling the ear pieces inward/outward
3 = turning the ear pieces forward/back
• Always wear the headset properly.
The left ear piece (with the connecting cable) is marked with "L", the right one with "R"
(respectively located on the inside of the carrying handle).
Maintenance and cleaning
The product is maintenance-free. Do not disassemble the product. Repair or maintenance work
must be carried out by a specialist.
Unplug the headset from the audio device, before cleaning it.
You can use a clean, dry, soft cloth for cleaning.
Do not use aggressive, chemical or abrasive cleaning agents, as this may lead to discolouration or
changes in the surface material.
Disposal
The product must not be disposed of with the household waste.
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Technical data
Connection ....................................................3.5 mm jack plug (4-pin), with microphone
Max. acoustic pressure ..............................<121 dB (1 mW/179 mV, at IEC318 Ear Simulator)
Sensitivity ......................................................96 dB (1 kHz, 0,1 V, at IEC318 Ear Simulator)
Impedance ....................................................Headphone: 28 Ω (at 1 kHz)
.........................................................................Microphone: 200 Ω
Frequency range ..........................................Headphone: 10 Hz to 20000 Hz
.........................................................................Microphone: 50 Hz to 16000 Hz
Loudspeaker driver: .....................................40 mm
Ambient conditions ...................................... Temperature +5 °C to +60 °C, relative air humidity 20% to
Cable length ..................................................1.2 m
Dimensions....................................................185 x 175 x 77.5 mm (H x W x D)
Carrying handle width .................................30 mm
Weight ............................................................260 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
Make sure that the plug is inserted into
the headset with the short cable piece.
The plug with long cable must be in-
serted into the headset connector of the
tablet computer or mobile phone.
85%, noncondensing

Werbung

loading