TTI TCB-550N Bedienungsanleitung Seite 4

Consider that this location of the transceiver should not interfere with
the driver and passengers. Choose a spot where the microphone and
all controls are easily accessible.
1)
Put the mounting bracket on the proper location where you are
going to install.
2)
Drill holes and fix mounting bracket on the location.
3)
Connect the antenna cable plug to the standard receptacle
on the transceiver, which is marked "ANT".
Connect the radio using the included cigarette lighter plug
4)
Mount the microphone bracket on one side of the transceiver, or
5)
near it using two screws included.
Connect the microphone to the transceiver's microphone
6)
receptacle. Now you are ready to operate the transceiver.
4
TCB-550N