Setting And Using The Alarms; Introduction; Using The Alarm Buttons; Alarm Status Indicators - Bose WAVE Music System III Bedienungsanleitung

Introduction

Music System III has two independent
The Wave ®
alarms, Alarm 1 and Alarm 2.
Each alarm can be set for:
• Time
• Wake-up source: buzzer, radio, or CD
• Volume

Using the Alarm buttons

Using the Alarm buttons on the bottom of the remote
you can setup and operate each alarm:
Press to turn Alarm 1 on or off.
Press to turn Alarm 2 on or off.

Alarm status indicators

The upper right-hand corner of the display shows the
alarm status indicators if the alarm is set:
Downloaded from www.Manualslib.com
• Press to activate the Alarm Setup
mode and view Alarm 1 settings.
• Press again to view Alarm 2 settings.
• Press again to exit the Alarm Setup
mode.
Example: Alarms 1
and 2 are set
Alarm 1 Alarm 1 time
Alarm 2 Alarm 2 time
manuals search engine
S
ETTING AND

Setting the alarms

You can choose the settings for each alarm by activating
the Alarm Setup mode and displaying the settings for the
alarm you want to change.
To setup Alarm 1 or 2:
1. Press Alarm Setup to activate the Alarm
Setup mode and display the settings for
Alarm 1.
The alarm number and
time start flashing.
Then the display
shows you the current
settings for Alarm 1.
2. Using the Time buttons, set the
alarm time.
3. Select your wake-up source:
• BUZZER
• Press
• Press
4. Press Volume up or down to set
AM
the volume level of the selected
PM
wake-up source.
AM
PM
5. Press
Steps 2-4 to set up Alarm 2.
6. Press
The alarm you set is turned on and the alarm time
appears on the display:
U
SING THE
is the factory alarm setting.
to choose a radio station.
to choose a track.
to enter the Alarm 2 setup mode. Repeat
again to exit the Alarm Setup mode.
Alarm number
and time
A
LARMS
Flashing
English – 15