Degrees Fahrenheit/Centigrade - Indel B TB15 Bedienungsanleitung

TB 15-18

DEgREES fAhRENhEIT/CENTIgRADE

To set the temperature unit of measurement to degrees
Fahrenheit or Centigrade, activate symbols F or C
OvER - COOLINg
The Over - Cooling function, described above, is set
by activating symbols o C.
fAULTS
Any operation faults will be displayed after 90 seconds and will be presented on the display with the
following codes:
1 The thermostat has short-circuited or is not correctly connected to the control unit:
2
The compressor is blocked:
3
The ventilator is sending the control unit a value which exceeds 0.6A:
4 The cooling system holds too much gas and the compressor is not able to operate
at the minimum number of revolutions/rpm:
5 The ambient temperature is too high:
6
Insufficient voltage (Voltage below the cut-out value):
7 No communication between the display and control unit, a scrolling horizontal
line appears on the DISPLAY for a few seconds, the refrigerator turns itself off.
TB15-18_00_03-2012
Downloaded from www.Manualslib.com manuals search engine
REFRIGERAZIONE MOBILE - FRIGOBAR
ISO 9002 certified
ENGLISH
R6
R3
R2
R4
R5
Lo
-
17