Using The Stopwatch - Lotus 10121 Betriebsanleitung

USING THE STOPWATCH

This stopwatch is able to measure and display time in 1second united up to maximum
of 29min 59sec. Stopwatch will stop automatically after running continuously for 30
minutes.
[Measuring time with the stopwatch]
1. Press button "A" to start the stopwatch.
2. The stopwatch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second hands
return to their ZERO positions.
* Button a / B does not function during resetting the stopwatch.
Reset
measurement
ILMJS00
Time
Stop
14
ILMJS00
STOPWATCH RESET
This procedure should be performed when the stopwatch second hand does not return
to the ZERO second position after the stopwatch has been reset, and including after the
battery has been replaced.
1. Pull the crown out to the 1st Click Position.
2. Press button "A" to set the stop watch second hand to the ZERO position.
*The stopwatch minute hand is syncronized with stopwatch second hand.
*The stop watch second hand can be advanced rapidly by continuously pressing
button "A".
3. Once the hands have been zeroed, reset the time and return the crown to its normal
position.
(incl. after replacing battery)
15