Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Restriction of use
The Akku Dortrimmer 18V is designed exclusively for
sawing of Doors and Frames in screed without the use of
water and in combination with a Dust Category M vacuum
cleaner. When the machine is used in another way, it shall
be regarded as unfi t for the purpose.
Wolff GmbH & Co.KG shall not accept any liability for
damage resulting from non-intended use.
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standard-
ization documents:
DIN EN 1037, EN ISO 12100, DIN EN 62841-1,
DIN EN 62841-2-5,
DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the:
2006/42/EC, 2014/30/EU, 2014/35/EU.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
Technical data
Power supply Charger................................120V / 230 V AC
Frequency ..................................................................50 Hz
Battery voltage..............................................................18 V
Battery capacity.............................................................5 Ah
22.01.2020
Maximum speed................................................8.500 r.p.m.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1
Weight with Akku........................................................5,9 kg
Max. grooving depth.............................................0 - 45 mm
Max. grooving height............................................7 - 25 mm
Cutting blade........................................................ Ø165 mm
Scope of delivery:
1 Battery door saw Piranha 18V
2 batteries 18V / 5Ah
1 charger 120V / 230V 50Hz
1 Allen key SW6
1 Allen key SW5
1 Allen key SW3
1 hearing protection
1 safety glasses
1 HM saw blade
1 transport case
1 instruction manual
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff -tools.de
i.V.
7436
7436
7436
7436
7436
74360 Il
7436
7436
7436
7436
7436
7436
7436
7436
7436
7436
7436
7436
7436
0 Il
0
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
0 Il
Ilsfel
sfel
sfel
sfel
sfel
sfel
sfel
sfel
sfel
sfel
sfel
sfeld |
sfel
sfel
d |
d |
d |
d |
d |
d |
d |
d |
d |
d |
d |
d |
d |
d |
d |
d | Unge
d |
d |
d |
d |
d |
d |
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Unge
Ungerhal
Unge
Unge
rhal
rhal
rhal
rhal
rhal
rhalde 1
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
rhal
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
de 1
2.0 Safety Warnings
2.1 General Power Tool Safety Warnings
Warning
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instructions may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
2.2.1 Work area safety
(cordless) power tool.
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive at-
mos-pheres, such as in the presence of fl ammable
liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while opera-
ting a power tool.
2.1.2 Electrical safety
Distractions can cause you to lose control.
a) Power tool plugs must match the outlet. Never mo-
dify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige
rators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
EN
16
Werbung
Inhaltsverzeichnis
