Herunterladen Diese Seite drucken

Fitting The Stingray Swing-Out In A Car - Stingray Swing-out Gebrauchsanweisung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
GUARANTEE
The warranty on the Stingray Swing-out is one year after the purchase date, and this only remains valid
if original parts are used for repairs. Parts that are subject to normal wear and tear are not covered by
the warranty.
A 5-year warranty applies to frame breaks. Furthermore, there is a guarantee for production defects
and material errors in accordance with national regulations and provisions, or as indicated in the sales
and delivery conditions of the supplier where the product was purchased. These may include the
provision that the warranty is subject to customers' responsibility with regard to maintenance and care
of the product at the intervals specified in the manual.
The warranty can only be honored if the R82 product is used in the same country for which it was
made and if the product can be identified by serial number and if the conditions of customer
responsibility are met.
The warranty does not cover accidental damage, including damage caused by negligence or incorrect
use. The warranty does not extend to consumable parts that are subject to normal wear and that must
be replaced regularly. This warranty is void when non-original R82 parts and accessories are used or
when repaired or replaced by non authorised R82 representatives.
R82 reserves the right to inspect the warranty product and the relevant documentation before
agreeing to the warranty claim. The guarantee is issued by the R82 importer or by a rehabilitation
dealer.
MAINTENANCE
The metal parts of the Stingray Swing-out should be cleaned with a damp cloth. The upholstery of the
Stingray Swing-out seat is washable according to the washing instructions as stated on the sewn-in
label.
Do not use cleaning agents that contain chloride, alcohol or aggressive ingredients.
Settings/adjustments not described in this manual may only be made by authorised
R82 staff.
24
Transportation | Stingray Swing-out
8
Transportation | Stingray Swing-out
Junior | Transportation
Junior | Transportation

FITTING THE STINGRAY SWING-OUT IN A CAR

With Easyfit mounting system:
1.
Before placing the Stingray Swing-out, the distance from the Easyfit mounting system (F) to the
frame of the Stingray Swing-out (G) must be set to the maximum. To do this, pull out the central
red button (B) and allow it to lock into its extreme position.
2.
Place the protective cushions on the rear seat to protect the upholstery of the rear seat.
3.
Place the Stingray Swing-out on the rear seat and slide (with a clear click) the two click systems
(C) onto the Isofix anchor points. The Isofix anchoring points are located between the seat and
the backrest of the rear seat. Sometimes these are well hidden.
4.
Pull out the central red button (B) again and at the same time push the Stingray Swing-out
towards the back of the car. Let the button click when the shortest possible length of the
positioning tube has been reached. The achievable length differs depending on the seat depth of
the rear seat. This positions the Stingray Swing-out.
5.
Unscrew the socket head cap screws (D) of the Stingray Swing-out. The adjustable feet must be
placed firmly on the floor of the car. For some cars, storage compartments are made in the
bottom. Then ensure a sturdy plate between the adjustable feet and the cover plate of this
storage compartment. Tighten the Allen screws after adjusting.
6.
Check whether the Stingray Swing-out is positioned virtually horizontal. If this is not the case,
follow steps 4, 5 and 6 again.
7.
Check that the Stingray Swing-out functions properly and that it locks (clicks) in both end
positions.
Removing the Stingray swing-out from the car:
1.
Remove the Stingray Swing-out through the two
horizontal latches (E) of the Easyfit mounting system
(C). This will be the way that the Easyfit mounting
system will loosen from the Isofix anchor points.
2.
Carefully remove the Stingray Swing-out from the car
and place it in a safe place
Fitting of the car seat must be carried out in according to this instruction.
Transportation| Stingray Swing-out
Transportation | Stingray Swing-out
UK
25
9

Werbung

loading