Philips FlexCare Bedienungsanleitung Seite 12

EngliSh
12
Brushing modes
Clean: The ultimate in plaque removal
1
(default mode).
2 White: 2 minutes to remove surface stains and
30 seconds to brighten and polish your front teeth.
gum care: Combines the Clean mode with
3
an additional minute to gently stimulate and
massage gums to improve gum health.
The Sonicare comes with the Clean mode activated.
Note: When the toothbrush is switched on,
you cannot toggle between modes.
1 Before you switch on the Sonicare, press the
mode button to toggle between modes.
, The selected brushing mode lights up.
, Once a brushing mode has been selected,
it remains active until another brushing mode is
selected.
Note: When the Sonicare is used in clinical studies,
the default 2-minute Clean mode must be selected.
The handle has to be fully charged and the Easy-start
feature must be deactivated.
Intensity levels per mode
- low: 1 LED indicator light
- Medium: 2 LED indicator lights
- high: 3 LED indicator lights
Note: to adjust the intensity level to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.