Dangers Caused By Electric Power; Servicing, Maintenance, Fault Repair; Structural Modifications To The Machine; Fire Protective Measures - Komet Niki Vac Betriebsanleitung

General Safety Instructions
3.4

Dangers caused by electric power


Only have work carried out on the electric power supply by a licensed electrical
engineer.

Regularly check the electrical equipment on the machine.

Immediately remove any loose connections or scorched cable.(only by licensed
electrical engineer.

Only use mains plugs, which are authorised for the voltage power supply specified
on the type label. In case of doubt, please consult your dealer or the local Electric
Utility Co.

Do not insert any objects into the ventilation slots of the machine. There is a
danger of electric shock.

Spraying water and steam jets in the operating site is forbidden. There is a danger
of electric shock.
3.5

Servicing, maintenance, fault repair


Pull out the mains power plug when undertaking any of the above mentioned work.

Carry out the prescribed setting, servicing and inspections according to specified
schedule.

Have any faults repaired by a skilled technician or by your dealer.
3.6

Structural modifications to the machine


Do not undertake any modifications, add-on work or conversions to the machine
without the manufacturer's approval.

Immediately exchange machine components, which are not fully functional.

Only use original spare parts or consumables.
Operating Instructions - Translation
3.7

Fire protective measures


Keep the ventilation slots free (a distance of more than 10 cm).

Do not place the machine close to flammable objects.
3.8

Cleaning the machine and disposal


Properly handle and dispose of used substances and materials.
3.9

Sound level


The continuous sound pressure level emitted from the machine should be less
than 70 dB (A).
3.10

Dangers resulting from the pneumatic spring on the chamber cover


Under no circumstances should you undo the pneumatic spring. Pneumatic springs
have an extremely high internal pressure (up to approx. 300 bar).

Prior to disposal the pneumatic spring must not be under pressure. Please request
our disposal instructions!
19 05 066 - 01.01.2012
Eng - 5/24