Whispbar K393W Montageanleitung Seite 8

EN
Fitting Kit
K393W
Ensure the two pins of the clamp engages
correctly with the holes in the roof rail.
Place one hand on the leg and apply
downward pressure.
Slide clamp through opening in leg.
Thread the coach bolt through the clamp
and the leg.
Tighten the plastic knob.
Ensure the clamp engages correctly on
inside of roof rail.
Ensure the plastic knob is in the position
shown when fully tightened.
Do not over tighten.
Repeat for all four positions.
8