Proper Use; Customer Service And Spare Parts; Liability And Warranty; Symbols Used - Schwamborn EU 430 Originalbetriebsanleitung

EN EU 430 / EU 510
High‐speed floor polishing machine

2 Safety

1.1 Proper use

The machine may only be used with task‐specific ac­
cessories supplied by the manufacturer for
high‐speed polishing of even, horizontal PVC, lin­
oleum and stone floors.
Any other use of the machine can lead to dangerous
situations and is prohibited!
The machine must not be used for wet cleaning or
picking up dirt! The integrated suction device is to be
used exclusively for the polishing dust created by the
machine.
To ensure correct use of the machine, follow the in­
structions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!

1.2 Customer service and spare parts

In case of customer service queries, accessories,
replacement parts or repairs, please contact the ma­
nufacturer. To ensure your queries are dealt with as
quickly as possible, always quote your machine data.
These are located on the machine's nameplate.

1.3 Liability and warranty

 Schwamborn Gerätebau GmbH
All rights, including those pertaining to translation, lie
with Schwamborn Gerätebau GmbH.
No part of this documentation may be reproduced,
used or distributed in any form without the written
permission of Schwamborn Gerätebau GmbH.
Liability or warranty is excluded if:
— The instructions in the operating manual have
not been observed.
— The machine or its attachments were improperly
operated.
— The maintenance was carried out inadequately
or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used, has
been altered or was removed.
— The specified power supply ratings and surroun­
ding conditions have not been observed.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer's permission. Any
such actions will void the warranty.

1.4 Symbols used

The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Warning
Additional information
This symbol indicates additional information.
The EU 430 / EU 510 high‐speed floor polishing
machine is referred to as the machine in this
operating manual.
2 Safety
This chapter contains a summary of the most import­
ant information on safety when handling the machine.

2.1 Accident prevention and safety

The following instructions comply with legislation, di­
rectives and publications such as:
— EC Machinery Directive
— EC Product Liability Directive
— Law on technical materials
— Law on equipment safety
— Law on product liability
This operating manual is intended for operators and
tool setters, as well as for the personnel that service,
maintain and repair the machine. Together with all
the technical documentation, it is intended to help
— avoid hazardous situations
— use the machine for its intended applications
— avoid downtime and repair costs
— maintain the function of the machine
— increase the service life of the machine
The manufacturer and owner of the machine must
observe the contents and provisions of the EC direc­
tives. The effectiveness of any measure ultimately
depends on how well all parties, i.e. the manufac­
turer, the owner and the machine operators, work
together to uphold safety standards.
Prohibition Direction
13