Charging The Internal Battery - Spypoint LINK-S Schnellstartanleitung

Getting started
REMOVE THE CAMERA FROM THE MOUNTING BRACKET
• Push the tab to release the camera from the mounting bracket.
• Remove the camera.

CHARGING THE INTERNAL BATTERY

Charge the camera for 24-48 hours before use. While charging,
make sure the camera is turned off and the solar panel is facing
down so it does not interfere with the USB charging process.
Plug the 12V-USB cable from the 12V port at the bottom of the
camera and connect it to a USB port. Once plugged, the screen will
turn on and it will show the charging battery level for 10 seconds.
Press the OK button once more to see the battery level reappear.
FINDING THE SIM ID
The SIM ID number can be found in the battery case. You will need
this number to complete the registration of the LINK-S camera and
connect to the application.
4