Basic Settings - Spypoint LINK-S Schnellstartanleitung

SETTING THE APP
The SPYPOINT App let you configure all the camera's settings.The-
ses new settings will take effect the next time the LINKcamera con-
nects to update it's status. Here are the most important settings,
there is more are available in the app.

BASIC SETTINGS

Mode - PHOTO
Delay:
Multi-shot:
Mode - TIME LAPSE
Interval:
Mode - VIDEO
Delay:
Photo first:
Video length:
TRANSFER SETTINGS
First transfer time:
Transfer frequency:
Sets the time interval between each detection before
the camera records the next photo.
Takes up to 2 consecutive shots at each detection, with
a 5 second delay between each photo.
This option allows the camera to take photos at regular
preset intervals without detection.
Sets the time interval between each detection before
the camera records the next video.
When this option is enabled, a photo is taken
immediately before each video.
Allows the user to select the duration of the recording.
Allows the user to choose at what time of
the day the camera communicates for the
first time.
Allows the user to choose the number of
synchronizations that the camera performs
daily.
7