Grundig Heinzelmann Bedienungsanleitung Seite 27

SYSTEM SETTINGS ___________________________
Network profile:
The device remembers the last four wireless
networks it has connected to, and automatically
tries to connect to whichever one of them it can
find. From here you can see the list of registered
networks. You can delete unwanted networks.
Clear network settings: Select "YES" to clear all the
current network settings. Select "NO" to cancel.
Keep network connected:
If you choose to keep network connected, the WiFi
will not disconnect even you are in standby mode
or non-network mode.
TIME/DATE
Set the time manually or auto update, time format,
time zone and daylight.
LANGUAGE
Change it as your preference. Available languages:
English, Danish, Dutch, Finnish, French, German,
Italian, Norwegian, Polish, Portuguese, Spanish,
Swedish, Turkish.
FACTORY RESET
Resetting all user settings to default values, so that
time and date, network configuration and presets
are lost. However, current software version of the
radio is maintained
SOFTWARE UPDATE
Auto-check setting: This option automatically
checks for new updates from time to time.
Automatic updating is enabled by default. Check
now: Search for available updates immediately.
You will be asked if you want to go ahead with
download and installation of an update. After a
software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure
that the radio is plugged into a stable main power
connection. Disconnecting power during an
upgrade may permanently damage the unit.
SETUP WIZARD
With this function, you can start the setup wizard
at any time. Any parameters or stations entered
already are not deleted. For more information,
please read the Section First-time setup.
INFO
View the firmware version and the radio ID.
PRIVACY POLICY
View the information of Privacy Policy.
BACKLIGHT
You may change the power - on backlight level to
High, Medium or Low.
POWER SAVING
You can put the radio into idle for saving energy.
Push the Standby switch to off on the right side
of the device, then the radio will be activated into
power saving mode. Note: All the alarms, time,
network connection will be deactivated while the
radio is in power saving mode.
ENGLISH 27