Grundig Heinzelmann Bedienungsanleitung Seite 21

GETTING STARTED ___________________________
Connection and Preparation
Connect to the speaker using the AC adaptor with
the speaker.
Connecting to the network
•Power on your device and connect to a wireless
access point, router or similar net-work device.
•The network device needs to support WiFi
(802.11 a/b/g/n) wireless connection.
Make sure you have setup the wireless network
and you have the WEP, WPA or WPA2 security
password to activate the connection. You may
also use the WPS (WiFi Protected Setup) function
for easy pairing between the network device and
Heinzelmann. Check if the light indicators on the
network device are in appropriate status.
Connecting a USB memory stick
Insert the USB plug of a USB memory stick into
the USB port at the back of the device. The system
of the USB must be FAT 16, FAT 32. It is not
compatible with NTFS or other systems.
Connecting an audio source via
3.5mm cable
Use a standard 3.5mm audio cable to connect the
audio output from the external device to the AUX IN
socket on the back of the device.
Connecting the headphones
Turn the volume down before using the
headphones.
Inset the headphone plug (standard 3.5mm) into
the headphone socket at the back of the device.
ENGLISH 21