General Tv Operation; Using The Channel List; Configuring Parental Settings - CONTINENTAL EDISON CELED32S0817B3 Bedienungsanleitung

Power Up Mode
Virtual Remote
CEC
CEC Auto Power On
Speakers
Installation Menu Contents
Automatic Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
channel scan Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue
(Retune) stations.
Manual channel
This feature can be used for direct broadcast entry.
scan
Network Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan network channels. Digital Cable: Searches for cable network channels.
Analogue fine You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Installation
Displays installation settings menu. Standby Search: Your TV will search for new or missing channels
Settings
while in standby. Any new found broadcasts will be shown.
(Optional)
Clear Service Use this setting to clear channels stored. This setting is visible only when the Country option is set
List to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set active
stations to be listed by using the Channel List options.
Press the OK/TV button to open the Channel List. You
can filter the listed channels by pressing the Blue button
or open the Edit Channel List menu by pressing the
Green button in order to make advanced changes in
the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on
the list. You can make multiple choices by pressing the
Yellow button. Then press the OK button to open the
Channel Edit Options menu and select Add/Remove
Favourites option. Press the OK button again. Set the
desired list option to On. The selected channel/s will
be added to the list. In order to remove a channel or
This setting configures the power up mode preference. Last State and Standby options
are available.
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left or
Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press Left or Right button to enable or disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier. You
can use the remote control of the TV to control the volume of the audio device.
English - 43 -
channels from a favourite list follow the same steps and
set the desired list option to Off.
You can use the Filter function in the Edit Channel
List menu to filter the channels in the Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite lists
to be displayed everytime the Channel list is opened.
The filtering function in the Channel list menu will only
filter the currently displayed Channel list in order to
find a channel and tune in to it. These changes will not
remain the next time the Channel list is opened if you
don't save them. To save the changes on the list press
the Red button after filtering while the Channel list is
displayed on the screen.

Configuring Parental Settings

The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,
channels and using of menus. These settings are located
in the System>Settings>Parental menu.
To display parental lock menu options, a PIN number
should be entered. After coding the correct PIN number,
Parental Settings menu will be displayed.