General Tv Operation; Configuring Parental Settings - CONTINENTAL EDISON CELED32S0716B3 Bedienungsanleitung

Power Up Mode
Virtual Remote
CEC
CEC Auto Power On
Speakers
Installation Menu Contents
Automatic
channel scan
(Retune)
Manual channel
scan
Network
channel scan
Analogue fine
tune
Installation
Settings
Clear Service
List
Select Active
Network
First time
installation

General TV Operation

Using the Channel List
The TV sorts all stored stations in the Channel List. You
can edit this channel list, set favourites or set active stations
to be listed by using the Channel List options. Press the
OK/TV button to open the Channel List. You can filter the
listed channels by pressing the Blue button or open the Edit
Channel List menu by pressing the Green button in order
to make advanced changes in the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on
the list. You can make multiple choices by pressing the
Yellow button. Then press the OK button to open the
Channel Edit Options menu and select Add/Remove
Favourites option. Press the OK button again. Set the
desired list option to On. The selected channel/s will
be added to the list. In order to remove a channel or
channels from a favourite list follow the same steps and
set the desired list option to Off.
Downloaded from www.Manualslib.com
This setting configures the power up mode preference. Last State and Standby options
are available.
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left or
Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press Left or Right button to enable or disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier. You
can use the remote control of the TV to control the volume of the audio device.
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue
stations.
This feature can be used for direct broadcast entry.
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
network channels. Digital Cable: Searches for cable network channels.
You can use this setting for fine tuning analogue channels. This feature is not available if no
analogue channels are stored.
Displays installation settings menu. Standby Search (Optional): Your TV will search for new or missing
channels while in standby. Any new found broadcasts will be shown.
Use this setting to clear channels stored. This setting is visible only when the Country option is set
to Denmark, Sweden, Norway or Finland.
This setting allows you to select only the broadcasts within the selected network to be listed in the
channel list. This feature is available only for the country option of Norway.
Deletes all stored channels and settings, resets TV to factory settings.
manuals search engine
You can use the Filter function in the Edit Channel
List menu to filter the channels in the Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite lists
to be displayed everytime the Channel list is opened.
The filtering function in the Channel list menu will only
filter the currently displayed Channel list in order to find
a channel and tune in to it. This changes will not remain
the next time the Channel list is opened.

Configuring Parental Settings

The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,
channels and using of menus. These settings are located
in the System>Settings>Parental menu.
To display parental lock menu options, a PIN number
should be entered. After coding the correct PIN number,
Parental Settings menu will be displayed.
Menu Lock: This setting enables or disables access to
all menus or installation menus of the TV.
Maturity Lock: If this option is set, TV gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
English - 43 -