Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.1 Instructions for assembly
EN
8.
Now you can hang the mirror. The holes in the frame of the mirror goes on the screws and hang the mirror slowly
few millimetres down. The mirror is now installed!
For the models marked ZP 8000 - ZP 59999
The mirror is not equipped with any control. It is turned on/off through the switch of the light located in the house. Two-bu-
tton switch is recommended for individual choice of lighting in the bathroom.
For models marked ZP 8000V - ZP 59999V
The mirror is equipped with a control – touch switch. It is turned on/off by touching the centre of the sensor. It is possible to
set the color of lighting with these models (color temperature or chromaticity) by holding your finger on the sensor. Color
temperature ranges from 2700K (warm white) to 6000K (cool white) or the other way around. Color temperature is automa-
tically saved to the memory. When turning on the mirror next time, the saved color temperature will be used.
32
ZP 8000 - ZP 59999
ZP 8000V - ZP 59999V
Use
7.2 Instructions for assembly
ZP 1001 - ZP 7999
ZP 1001S - ZP 7999S
Technical specification
Power supply
230 V AC 50 Hz, L+N+PE
10 A max RCD 30 mA..
Front fuse
Input
5-50 Watt
Appliance class
I.
Weight
Max 15 kg
Light source
LED strip, cool white
Ballast
1 x ballast for 12 V DC SELF
IP Code
IP 44
The mirror consists of aluminium frame comprising various profiles of a size 40 x 50 mm. Mirror of various shapes and sizes
(width and height: 400 – 1500 mm, thickness of glass: 4 – 6 mm) is stuck on the frame. There is an access to the power supply
from the back side of the mirror through the metal cover with stainless steel screws. Variant "S" is equipped with motion
sensor. Variants of the product are based on size, shape of the mirror. Electric connection remains the same.
Electric diagram
LED mirrors with sensor art. number: ZP xxxx-S
Products of art. number: ZP xxxx Sx
with motion sensor
LED mirrors without sensor art. number: ZP xxxx
Products of art. number: ZP xxxx
without sensor, connected to switch of light
Instructions for assembly
For the assembly use aluminium bracket, a pair of wall plugs and screws which are included in the package. These are de-
termined for brickwork with a standard plaster thickness. For other types of wall use appropriate attachment components.
N
220-240VAC
N
220V~
L
L
220-240VAC
220-240VAC
L N
N L
IR - sensor
0V
0V 0.1V
PE
Sensor
head
SR-8001A
SELV
N
N
L
220V~
LED
L
lamp
220-240VAC
PE
SELV
EN
LED
lamp
33
Werbung
Inhaltsverzeichnis
