Maintenance - Nimco ZP 8000 Gebrauchsanleitung

EN
The mirror is basically maintenance-free. Outer side of the mirror requires washing by classic detergents for washing win-
dows. Do not use any aggressive detergent (especially those containing chlorine and its derivatives) which can cause oxi-
dation of the mirror. Inner side of the mirror does not require any specific maintenance. In case of damaging the protective
cover, it is necessary to have it replaced in producer's service centre.
Warning! Turn the mirror off and turn off the electricity supply mains before operating the mirror. Electric equipment of the
mirror is maintenance-free, only in case of light source failure it is necessary to replace it. Contact the producer or seller for
any repairs. Installation of electrical device requires qualified electrician and it should be done in accordance with regulati-
ons. If the supply cable is damaged, it must be replaced by the new cable provided by the producer or their service techni-
cian.
There is a warranty period in accordance with the Civil Code. The producer provides the warranty period of 24 months begi-
nning from the date of purchase. Any other handling with the product than this recommended in the manual is forbidden.
28

5. Maintenance

6. Warranty period
7.1 Instructions for assembly
ZP 8000 - ZP 59999
ZP 8000V - ZP 59999V
Technical specification
Power supply 230 V AC 50 Hz, L+N+PE
10 A max RCD (Fi) 30 mA..
Front fuse
Input 5-50 Watt
Appliance class I.
Weight Max 20 kg
Light source LED strip, cool white / warm white
Ballast 1 – 2 x ballast for 12 V DC SELF
IP Code IP 44
The mirror consists of aluminium frame comprising various profiles according to the type, of a size 20-50 x 20-50 mm. Mirror
of various shapes and sizes (width and height: 400 – 1500 mm, thickness of glass: 5 mm) is stuck on the frame. There is an
access to the power supply from the back side of the mirror through the metal cover with stainless steel screws. Variants
of the product are based on size, shape of the mirror (rectangular, square, oval, round with sharp edges, round edges, etc.),
aluminium frame and different LED lighting (warm white / cool white). Electric connection remains the same.
Light source in this type of mirror is irreplaceable, after the lifespan is over, the whole mirror needs to be exchanged.
Electric diagram
Products of article numbers: ZP 8000 – ZP 59999:
-
L
Power supply
5-50W
230V
12V
LED
N
+
SELV
PE
Products of article numbers: ZP 8000V – ZP 59999V („V" with a switch for on/off and changing the colours warm / cool white):
L
Power supply
5-50W
230V
LED
N
SELV
PE
Instructions for assembly
The light is determined to be attached to wall or another suitable inner surface.
The light can be installed in the area around the basin or around the shower or bath but it cannot be placed in zones 0+1+2
(see the pictures in the paragraph Instructions for Assembly – installation on wall). Connecting to electricity network requires
a qualified electrician and must be done according to the regulation 50 Sb/78. Connect the supply cable (at the back side
of the mirror) to the existing mains in the wiring box placed preferably behind the mirror. If there is already a supply cable in
the wall, it is possible to connect it with the mirror cable on the back side of the mirror by the terminal box (article number
ZP 01 – not included in the package). It is highly recommended that the installation is accomplished by two persons.
For the assembly use a pair of wall plugs and screws which are included in the package. These are determined for brickwork
with a standard plaster thickness. For other types of wall use appropriate attachment components.
EN
29