After Operation; Cleaning, Maintenance, Storage, Disposal; Cleaning; Maintenance - Zipper Maschinen ZI-ASA305A Betriebsanleitung

13.6 After operation

When the work is finished, the woodworking machine must be switched off
first, and then the extraction machine:
14

CLEANING, MAINTENANCE, STORAGE, DISPOSAL

Danger due to electric voltage! Don't clean or do maintenance on the machine while
it is still connected to the power supply: Damages to machine and injuries might occur
due to unintended switching on of the machine!
Therefore: Switch the machine off and disconnect it from the power supply before any
maintenance works or cleaning is carried out.
Only a regularly serviced and well maintained machine can be a satisfactory tool.
Maintenance and service deficiencies can lead to unpredictable accidents and injuries.
Repairs requiring special expertise should be carried out only by authorized service
centers.
Improper repairs can damage the machine or endanger your safety.

14.1 Cleaning

Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment. Remove chips and dust etc. with a suitable tool.
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution.

14.2 Maintenance

The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Intervall
Before operating the
machine or after every
maintenance or servicing
Weekly
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-ASA305A
 Switch off the machine by pressing the on/off switch (0).
Disconnect the machine from the power supply by removing the plug from

the connection box.
W A R N I N G
Component
nuts
bolts
collection canister
filter cartridge/bag
wires
switch
safety devices
security stickers
dust collector hood
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
N O T I C E
N O T I C E
N O T I C E
Measure
Check if securely tightened.
Check, if necessary empty it
Check, if necessary, change the filter bag
Check for damage
Check for damage
Check the conditon
Check the conditon. If necessary replace
them.
Check for deposits that cumulate
especially on the protective fence. If
necessary clean it.
26