DE
only be done by the manufacturer or it's
service point.
For this reason, access to the technological
menu should not be explained in more detail
here.
POSSIBLE DEFECTS &
TROUBLESHOOTING
Monocular is a complicated optomechanical
device. Its repair and technical service may
be fulfilled only on conditions of the
company–producer or any authorized
service centre.
If after switching on the image is absent or is
blinking in the eyepiece, may be, power
elements are discharged or contacts in the
battery compartment are broken. Change
power elements and examine contact at
battery cap and inside the battery
compartment. There should be no signs
traces of corrosion or any dirt.
If changing of power elements and cleaning
of contacts doesn't help as well as in case of
any other defects and malfunctions of the
monocular don't try to disassemble and to
repair it by yourself. Turn to the Vendor or
company-producer, the address is indicated
at the end of this Manual.
27