Dipol D400 DNS Bedienungsanleitung Seite 11

DE
Press and hold on-button (4) till image
appears in the eyepiece of the day optics. On-
indicator should turn red (5). If the image in
the eyepiece doesn't appear and on-indicator
is blinking red, change power elements.
Use power elements and accumulators of the
well-known producers.
Sometimes, some accasional small dots can
be seen on the image, which is a feature
of the camera sensor and not a defect of the
device.
Use of the monocular as a separate device.
The monocular can be used with an optional
eyepiece (12) as a separate observational
device. You may insert the eyepiece directly
into the clamp (11) using special fittings, or
previously unscrew the clamp and attach the
eyepiece directly to the device body with
rings normally being a part of the eyepiece's
delivery scope.
With the dioptre adjustment of the eyepiece
(12) choose the best possible image
sharpness. After that, additionally adjust the
image quality by rotating the focusing handle
(8) while observing objects.
11