Dipol D400 DNS Bedienungsanleitung Seite 21

DE
OSD transparency.
The function of OSD transparency changes
from 0 (min) up to 5 (max), allows to set the
visibility level of static interface elements on
microdisplay.
Auto power off, minutes.
Allows to turn off automatically the device
after selected time of inactivity.
Image position correction.
- Align your optics exactly on a relatively
small object at approx. 100m and fix it in this
position tightly.
- Attach the D400 device to the optics with a
high-quality adapter.
- Look through the whole system again.
If the object is no longer in the middle:
- Press and hold the MENU controller until
the main menu appears.
- Turn the MENU controller, select the "Image
Position correction" and confirm your choice
by briefly pressing the MENU controller.
- In the CORRECT mode that appears, move
the object back to the center along the X-axis
by rotating the same MENU controller and
then briefly on it Press the controller.
- Move the object back to the center along the
Y axis and then press and hold MENU and go
back to the main menu.
21