Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
HP-P244 Headphones
Item no.
1427091
Intended use
The product is designed as a headphone-microphone combination to be connected to smart-
phones, mobile phones, tablets or other audio devices with a suitable headphone or headset
jack.
For safety reasons, you may not convert and/or alter the product. If you use the product for pur-
poses other than those described above, the product may be damaged. Furthermore, improper
use may cause hazards such as short-circuits, fire, etc. Please read the operating instructions
carefully and do not discard them. If you pass the product on to a third party, please hand over
these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Headphones
• 3.5 mm jack cable
• Storage bag
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
presented QR code. Please follow the instructions on the website.
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for injuries/material da-
mages resulting from failure to observe the safety instructions and the infor-
mation in these operating instructions regarding the proper handling of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material carelessly lying around. It may become a dange-
rous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure it
against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Handle the product with care. It can be damaged by impact, blows, or by being
dropped, even from a low height.
• If you have doubts about how the product should be operated, or about safety or
the connection of the product, consult an expert.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialist workshop.
• If you have any questions,that are not answered in these operating instructions,
please contact our technical customer service or another specialist.
• Do not listen to excessively loud music for long periods of time. This may damage
your hearing.
Start-up
To avoid distortion or mismatching which could damage the headsets or the
connected device, the product may only be connected to suitable headphone
or headset outputs. Please refer to the connection data contained in the
„Technical Data" section.
If your audio device does not have a suitable jack for the connection of a
headphone or headset, please use a suitable adapter.
• Turn down completely the volume at the device to be connected.
• Insert the jack plug of the included jack cable that is closer to the microphone housing into the
corresponding socket at the left ear cup of the headset.
The ear cups are labelled with R and L on the headpieces.
• Insert the other jack plug of the jack cable into the headset or headphones socket on your
device.
• Adjust the sound level, using the corresponding control on the audio device.
• Using the button on the microphone housing, you can:
Start/pause music playback
Answer calls (press briefly) or end calls (press long)
Activate voice control (if supported by the connected device)
Maintenance and cleaning
Use a clean, dry, soft cloth for cleaning. If the device is very dirty, use a cloth slightly moistened
with lukewarm tap water.
Disposal
Electronic devices are recyclable waste materials and must not be disposed of in
the household waste!
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Technical data
General information
Connector .............................................3.5 mm jack plug
Cable length .........................................1.2 m
Weight ..................................................147 g
Operating and storage conditions .......... -20 °C to +60 °C / 20% to 95% rF (non condensing)
Headphones
Frequency range ..................................20 - 20000 Hz
Impedance ............................................16 Ω
Sensitivity .............................................105 ±3 dB/mW @ 1 kHz
Harmonic distortion ...............................<2% @ 1 kHz
Speaker diameter .................................40 mm
Microphone
Sensitivity .............................................-47±3 dB
Max. acoustic pressure .........................115 dB
S/N ratio ................................................min. 70 dB(A)
Directional pattern ................................Cardioid
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
V2-0516-02-m-GB
Werbung
