Light/Night Lamp - Beurer WL 50 Gebrauchsanweisung

= Sleep melody (sounds of the sea)
SLP
Use the
= Music via an external audio source connected to the AUX input (e.g. MP3 player,
AUX
smartphone or CD player)
2. Press the Sleep button.
3. The light will switch on and 15 will appear in the display. Set the desired sunset duration (15, 30
or 60 minutes) using the Sleep button. During the simulated sunset, the mood light first switches
from white to yellow, and finally to red. The sleep function symbol
4. The selected music is switched off automatically after the set sunset has elapsed.
5. To cancel the sleep function early, press and hold the Sleep button for 2 seconds. The sleep
function symbol

7.4 Light/night lamp

The device features a night lamp with three brightness levels.
• To switch on the night lamp, briefly tap the sensor surface (speaker surface on the top of the
device).
• To set the light's brightness level, tap the sensor surface (speaker surface on the top of the
device) again.
button = sounds of the sea off
button = sounds of the sea on
OK
button to confirm.
disappears from the display.
40
appears on the display.