Using The Product; Video Mode - nedis DCAM44BK Kurzanleitung

Connecting the product to a power source
Option 1:
1. Plug the auxiliary power plug A
2. Plug the other end of the auxiliary power plug A
Option 2:
•
4

Using the product

1. Press power button A
2. Press menu A
3. Press up A
4. Press A
5. Press A
4
4
4
4
4
Menu
1. Press Menu A
2. Press and hold A
4

Video mode

4
1. Press A
2. Press A
4
4
4
DCAM44BK_MAN_COMP_0720.indd 8
8
A
.
Charge the product using the USB port A
The product automatically switches on and starts recording when you switch
on your car engine.
9
e
for 3 seconds to switch to setup interface.
w
or down A
9
to confirm the setting.
e
to exit the menu.
The product automatically switches on and starts recording when you switch
on your car engine.
An indicator light blinks blue.
In the top left corner of the display A
red dot blinks.
The camera switches off after the engine is off.
The recording is automatically saved on the microSD card (not included).
e
to enter the menu.
e
to switch between the video, photo and playback mode.
The icon in the top left indicates the current operation mode.
The video camera icon appears in the top left corner of the display A
9
to start or stop recording.
r
to activate or deactivate audio recording.
An indicator light blinks blue.
7
If A
is disconnected the camera stops recording.
The product automatically saves recordings on the microSD card.
7
into an auxiliary power outlet.
3
.
for 3 seconds to switch the product on or off.
r
to select the parameters.
t
the film camera icon appears and a
8
7
into the micro USB port
t
.
30-7-2020 14:30:54