Using Your Sound System; Fm Radio; Bluetooth - IKEA UPPLEVA AA-1081823-2 Bedienungsanleitung

5 Using your sound system

This chapter helps you use your sound
system to play media from a wide range
of sources� Make sure the necessary
connections are done before you start�
TV
If your TV has an HDMI ARC socket the
sound system can play sound from the TV�
To do this toggle the sound system source
key on the remote control until Television
is chosen�

FM radio

To search and store your favorite radio
stations follow these steps�
1� Install the FM antenna in a suitable
location and connect it to the FM antenna
input� Install the FM antenna in a suitable
location and connect it to the FM antenna
input� Press SOURCE on the sound system
bar, toggle to FM�
2� Press MENU on the sound system bar to
enter the menu options� Use </> to select
FM INSTALL and press OK� The available
stations are automatically stored� Press
MENU on the sound system bar to store
the channels� Use
between the stations�
To manually tune stations follow these
steps�
1� Press SOURCE on the sound system bar
and toggle to FM�
2� Press MENU on the sound system bar
to enter the menu options� Use </> to
select FM MANUAL TUNE and press OK� Use
</> to fine tune the frequency by steps
of 0�05MHz� Press OK to store the new
frequency� Select a new station number with
</> and press OK�
To delete stored stations follow these steps�
1� Press SOURCE on the sound system bar
and toggle to FM� Use </> to select the
station you want to delete�
2� Press MENU on the sound system bar to
enter the menu options� Use </> to select
FM DELETE and press OK� Press menu to
return to FM�
To choose your favorite display mode on
the sound system panel display follow these
steps�
Downloaded from www.Manualslib.com
, buttons to switch
manuals search engine
1� Press SOURCE on the sound system bar
and toggle to FM�
2� Press MENU on the sound system bar to
enter the menu options� Use </> to select
INFO and press OK� Use </> to select your
preferred display mode and press OK to
confirm.
- INFO<FREQ> will display the frequency
channel�
- INFO<RDS> will display the text from
Radio Data System (when available)�
- INFO<RADIO-TEXT> will display the radio
text (when available)�

Bluetooth

All Bluetooth enabled phones, tablets and
other media devices are compatible with
UPPLEVA sound system*� Once your media
device is paired with the sound system it
will automatically connect when BLUETOOTH
is chosen as a source again� The sound
system can be paired with 8 devices but it
will only be visible to the device connected
firstly. Follow these steps to pair, use and
disconnect Bluetooth�
To pair a media device�
1� Press the sound system source
button on the remote control and toggle
to BLUETOOTH� If there is no device
connected, the panel display will show
Bluetooth Wait�
2� Switch on Bluetooth on your media
device� Connect to the sound system by
connecting to "UPPLEVA"� Once connected
the display panel will show Bluetooth Ready�
3� Use , , and <+ VOL -> buttons to
control the music playing�
To choose your favorite display mode on the
panel display�
1� Press SOURCE on the sound system bar
and toggle to BLUETOOTH�
2� Press MENU on the sound system bar to
enter the menu options� Use </> to select
INFO and press OK� Use </> to select your
preferred display mode and press OK to
confirm. Press MENU to finish.
- ID3 will display the Title on the top row
and the Artist and Album on the bottom
row�
- TIME will display the text BLUETOOTH on
the top row and the Time on the bottom
row�
14