About This Guide - Chauvet DJ FREEDOM FLEX H4 IP Schnellanleitung

EN

About This Guide

The Freedom Flex H4 IP Quick Reference Guide (QRG) has basic product information such as mounting, menu options,
and DMX values. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
• This product is not intended for permanent installation.
• ONLY connect this product to a grounded and protected circuit.
• DISCONNECT from power and turn off before cleaning.
• DO NOT look at the light source when the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power by pulling on the cord.
• When mounting this product overhead, ALWAYS use a safety cable.
• DO NOT allow flammable materials close to the product when it is operating.
• DO NOT touch the product's housing when it is on because it will be hot.
• DO NOT close the Freedom Flex Case while the Freedom Flex Batteries are charging.
• The voltage of the outlet to which you are connecting this product must be within the range stated
on the decal or rear panel of the product.
• This product is for indoor or temporary outdoor use (IP54). Do not expose to harsh or excessively
corrosive environmental conditions (whether indoors or outdoors), including, but not limited to,
extreme temperatures, humidity, atmospheric conditions (including salinity or pressure), radiation
(UV, infrared or nuclear), shock and conditions which exceed the product's Ingress Protection (IP)
rating.
• This product may be exposed to rain and moisture.
• Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• Never connect this product to a dimmer or rheostat.
• Never carry the product by the power cord. Use only the handle to carry this product.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
• In the event of a serious operating problem, stop using immediately.
• DO NOT open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support or return a
product. Visit www.chauvetdj.com
What is Included
• Freedom Flex Case
• 6x Freedom Flex H4 IP
• 6x Freedom Flex Battery
• Power Cord
• Warranty Card
• Quick Reference Guide
To Begin
Unpack your Freedom Flex H4 IP and make sure you have received all parts in good condition. If the box or contents
appear damaged, notify the carrier immediately, not Chauvet.
AC Power
The Freedom Flex Case has an auto-ranging power supply that can work with an input voltage range of 100 to 240 VAC,
50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
1
QUICK REFERENCE GUIDE
www.chauvetdj.com
for contact information.
for more details.
Freedom Flex H4 IP QRG Rev. 1