Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INROLED_50
INROLED_50
1 | Proper use
The luminaire is used for illumination. The luminaire is intended for mounting in a lumi-
naire holder or mounting bracket.
For connection values see "Technical data". The supply cable is connected to the lumi-
naire via an M12 plug connection.
The safety information and all other information in this manual must
be followed. Read the entire operating manual carefully before
mounting and turning on.
Keep the operating manual with the device. It must be stored and
handed over to third parties when the product is passed on.
Field of application: for systems and other lighting in the Food and
beverage industry
HACCP certificated and Ecolab certificated
2 | For safe operation
The operating parameters of the LED luminaire specified on the type plate must cor-
respond to the supply parameters of the machine or of the transformer.
Under no circumstances may the luminaire be covered with cloths,
foils or similar. Object distance from the luminaire should be at
least 10 cm.
Machines or systems can emit voltage spikes due to various
factors. These voltage spikes in the power supply via machines or
systems should be avoided: Only use regulated 24V DC switched-
mode power supplies, not transformers with rectifiers, as these
can give rise to voltage spikes due to inductance.
Hot plugging should be avoided (connection of the luminaire to a power supply
which is already connected to the mains), since this can lead to the destruction of
the LED luminaire.
3 | Safety information
Installation of electrical equipment may only be carried out by quali-
fied electricians.
Follow the five safety rules according to DIN VDE 1005.
Failure to do so may result in damage to the LED luminaire, as well
as fire or other hazards.
Danger of electric shock! Disconnect before working on the
device or load. Ensure to disconnect all circuit breakers that supply
dangerous voltages to the device or load, when doing so. Even
when the device is switched off, the load is not galvanically isolated
from the mains.
DC
RGB-W
| 9
www.led2work.com
Werbung
Kapitel
Inhaltsverzeichnis
