Use of Inateck P6
EN
Startup
Note:
1) Inateck P6 will start sleep mode if there is no operation on it over 3 minutes. Short
press on the trigger can wake it up.
2) When the distance between Inateck P6 and its adapter exceeds the effective range,
scanned data will be kept in the buffer of Inateck P6. Quickly double press on the
trigger can upload data from buffer.
Wireless Mode:
1. Insert the 2.4G USB adapter into the USB port of computer. The initialization is
completed if blue LED on the adapter blinks once.
2. Power on Inateck P6 by toggling switch from OFF to ON. Short press the trigger to
emit red laser beam and scan barcodes.
3. Open a file on computer and move cursor to the blank where scanning output
should be placed. Scanning results can be displayed on computer then.
Wired Mode:
2