Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING: Your hand blender is
designed for intermittent use.
Do not use non-stop for more
than 1 minute. Allow to cool
down for a minimum of 5
minutes before further use.
Using for Ice crushing
The blender leg is fitted with a
special blade suitable for crushing
ice. It can be used to crush ice
cubes to produce fine ice for
cocktails, cold drinks etc.
1
Place a maximum of 4 ice cubes in
the plastic measuring beaker.
2
Press firmly down on the ice cubes
with the blender using a plunging
action until the ice cubes are fine
ice.
Top tips
•
When processing foods with strong
colour (eg. carrots) the plastic parts
of the appliance may become
discoloured. Wipe with cooking oil
to clean any discoloured parts.
•
For blending, select a slow speed
for soft ingredients, increase the
speed to produce the consistency
required.
•
Select a high speed for blending
hard ingredients.
•
When blending, start the process by
plunging the blender into the
ingredients. This will ensure all the
ingredients are pulled into the blade
to be processed. Continue this
movement until the mixture is to the
desired consistency.
•
Do not lift the blender head out of
the mixture as splashing may occur.
Cleaning
Before cleaning and maintenance,
switch the appliance off and unplug
it.
WARNING: Handle the blades
with care as they are sharp.
Clean the main housing with a
damp cloth and dry all the parts
thoroughly.
WARNING: Never immerse main
housing in water or any other
liquid.
Trouble shooting
Check the plug is in its socket and
the switch is in the 'on' position.
Is the plug itself or the socket
faulty? Check this by plugging in
another appliance.
•
Appliance gets very hot.
Blender has been used continuously
for too long.
Leave the appliance to cool.
•
Appliance not working.
The removable blender leg has not
been fitted correctly.
Detach the attachment and replace
as described in 'Assembly'.
Wall mounting bracket
The hand blender can be wall
mounted for convenient storage C.
WARNING: Always ensure you
are not drilling into the wall
adjacent to any electrical wires
or pipes such as water or gas.
1
Find a suitable position on the wall
or cupboard where the blender is to
be positioned.
2
Mark the fixing points through the
bracket.
3
If you are fixing to a solid brick or
block wall use a suitable size
masonary drill and drill to a depth of
25mm.
4
If fixing to a wood or cupboard
surface, drill a 2mm pilot hole or
use a bradawl.
DEDICATED HELPLINE
For UK customers
If you have any difficulty with your
appliance, do not hesitate to call.
We are more likely to be able to
help than the store from where you
bought it.
Please have the following
information ready to enable our staff
to deal with your enquiry quickly:
•
Name of the product
•
Model number as shown on the
underside of the appliance or rating
plate
•
Serial number
www.morphyrichards.com
C
g
5
Werbung
Kapitel
Inhaltsverzeichnis
