ASROCK A520M-HDVP/DASH Handbuch Seite 28

Chassis Water Pump Fan
Connector
(4-pin CHA_FAN1/WP)
(see p.1, No. 12)
Chassis Fan Connector
(4-pin CHA_FAN2)
(see p.1, No. 17)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1, No. 2)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 4)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 1)
26
GND
FAN_VOLTAGE
CHA_FAN_SPEED
FAN_SPEED_CONTROL
1 2 3 4
FAN_SPEED_CONTROL
CHA_FAN_SPEED
+12V
GND
+12V
CPU_FAN_SPEED
GND
FAN_SPEED_CONTROL
1 2 3 4
12 24
1 13
8 5
4
1
This motherboard
provides one 4-Pin water
cooling chassis fan
connector. If you plan to
connect a 3-Pin chassis
water cooler fan, please
connect it to Pin 1-3.
Please connect fan cables
4
to the fan connector and
3
2
match the black wire to
1
the ground pin.
This motherboard pro-
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
This motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
This motherboard
provides an 8-pin ATX
12V power connector. To
use a 4-pin ATX power
supply, please plug it along
Pin 1 and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.