Stûv Tulox 100 Benutzerhandbuch Seite 26

Note:
• Can only be executed with the master code.
• A shorter opening delay time has to be entered during the opening window (after the opening delay has
passed).
• If the function is called up prior to or during the opening delay time, the opening delay time can only
be extended. Shorter times will not be accepted.
• After the times have been changed, the opening window will continue to run. Code entry for opening is
possible.
• Entry of two valid codes within the operning window with Flash 4 only (see Opening after Dual Mode
Operation).
Start special function 9
Enter master code
Opening delay time
• for example, 20 min
Opening window
• for example, 7 min
Repeat entry
Special Function 9: Turning off the Opening Delay
Opening delay time
00 will turn o the function
Opening window
01 to 19 must not have a value of 00
Note:
• Can only be executed with the master code.
• This function can only be turned off during the opening window (after the opening delay time has passed).
• After this function has been turned off , the opening window will run for one last time. Code entry for
opening is possible.
- 26 -
Instruction Manual TULOX 100
( 2 s e c .

(example)
     
(example)
 
(example)
 
(example)
 
(example)
 
Steinbach & Vollmann GmbH & Co. KG • 42579 Heiligenhaus
 
) constant

constant
constant

constant

o
o

  


  
