Stûv Tulox 100 Benutzerhandbuch Seite 22

Special Function 0: Changing a Code (Master Code and User Code)
Note:
• The code must contain 6 digits.
• Do not use any personal or similarly known data, such as birthdays, for your code.
• Simple codes that are easy to guess, may not be used.
Avoid to record the selected code or save to disk. Should that for various reasons can not be avoid, so
the recorded code is to be kept safe and to be protected against unauthorized access by third parties.
• New codes will be rejected if
- the new code deviates from an existing code by only one digit
- the new code is identical to the code of a deactivated user (see special function 3)
• If the new code is rejected, the programme will exit the function immediately.
• For security reasons, you should only change the code when the safe's door is open. Please check that the
new code is functioning properly before closing the door.
Start special function 0
Enter old code
Enter new code
Re-enter new code
Special Function 1: Activate User
The only active user by factory settings is the user with the master code. Further users will have to be acti-
vated before they can operate the lock.
Note:
• Can only be executed with the master code .
• The new code must contain 6 digits.
• Do not use any personal or similarly known data, such as birthdays, for your code.
• Simple codes that are easy to guess, may not be used.
Avoid to record the selected code or save to disk. Should that for various reasons can not be avoid, so
the recorded code is to be kept safe and to be protected against unauthorized access by third parties.
• New codes will be rejected if
- the new code deviates from an existing code by only one digit
- the new code is identical to the code of a deactivated user (see special function 3)
- 22 -
Instruction Manual TULOX 100
(2 s ec .

(example)
     
(example)
     
(example)
     
Steinbach & Vollmann GmbH & Co. KG • 42579 Heiligenhaus
 
) constant

constant

constant

constant


  


 
