Stûv Tulox 100 Benutzerhandbuch Seite 20

Opening
Upon leaving the factory, the lock's master code is con gured as 1 – 2 – 3 – 4 – 5 – 6.
For security reasons, change the factory con gured master code immediately (see special function 0)!
Note:
• Entry is cancelled after 5 seconds have passed without a key being used
Enter code
After hearing the signal indi-
cating correct entry, turn the rotary
handle clockwise within 3 seconds.
Opening after Dual Mode Operation
Upon leaving the factory, the lock's master code is con gured as 1 – 2 – 3 – 4 – 5 – 6.
The lock can not be opened by factory confi gured master code entry only. It is necessary to set up an user
after changing the factory con gured master code (see special function 1).
Note:
• After fi rst code entry the second code has to be entered within 5 seconds
• After invalid code entry two valid codes have to be entered
Enter code
After hearing the signal indi-
cating correct entry, turn the rotary
handle clockwise within 3 seconds.
- 20 -
Instruction Manual TULOX 100
     
60°
     
60°
Steinbach & Vollmann GmbH & Co. KG • 42579 Heiligenhaus
   

  
